SlingShot RB-TX Pro
Print Profile(2)
Description
Boost Me (for free)
A boost means a lot to me, it allows me to continue developing models like this, and best of all, it's completely free for you. If you like my design, feel free to give me a boost and follow. Thanks and enjoy.
Membership
I design, you sell. Let’s make it real. My models are free for personal use, but if you’d like to sell physical products made from them, you can get a Commercial License. ✔ Keep 100% of the profits. ✔ Sell locally, online, or at events. ✔ Support my work and help me keep designing new models. Your support makes a real difference — thank you for being part of this journey!
RB-TX Pro Slingshot:
The new improved model.
After listening to some colleagues who prefer slingshots with a tightening clamp system instead of the traditional system with elastic bands, I decided to improve the last model that allows both types of tightening for the bands. That's why this new model is born…
"RB-TX Pro Slingshot", the ultimate hunting model!!!😁
In this model, in addition to the introduction of the dual option for fixing bands, a sight was also included in one of the clamps to assist the aiming point.
As in previous models, to complete the aiming points and simulate the fiber optic filament, the holes were designed with a dimension of 1.85mm. So you can use small pieces of translucent TPU or translucent PETG that will get a similar result.
Unlike previous models, the clamps on this slingshot are tightened with two M4x25mm bolts and M4 nuts, instead of M5, in order not to compromise the structure of the slingshot fork by opening a hole.
(Link of the bolts and nuts that I will buy for this model at the end)
This model can also be decorated with the rubber pads of the "RB-T V2" model that has already been shown before.
(you can find the file for the rubber/TPU pads in this link: )
https://makerworld.com/en/models/1177615-slingshot-rb-t-pro-v2#profileId-1187022
I hope you like it.
Happy shooting...👍🏻
WARNINGS:
*For PLA supports, AMS or another type of filament change will be required. If you don't have AMS, choose the "no AMS" profile to use normal supports.
**The TPU pads have to be glued with some kind of contact glue or cyanocrylate.
This slingshot was printed with four perimeters and 50% infill.
The clamps, printed with 100% infill, but also demonstrate sufficient robustness at 50% infill.
Extrusion nozzle: 0.4mm
Layer height: 0.2mm
Filament: Bambu Lab PETG HF
Supports: Bambu Lab PLA MATT
To complete the fiber sight, I cut 4/5mm pieces of Translucent TPU and press them on the holes.
The nuts and bolts I will buy are those in the links below, although any wide-head M4 screw will work fine.
(This design was inspired by SimpleShot's slingshots. If you like my work and want to buy a good quality slingshot, be sure to visit their page.)
Links:
M4x25 Bolts:
M4 Nuts:
🔧 Model Information & Safety
This design has been carefully developed, tested, and refined to ensure good structural integrity and performance when printed under proper conditions and using appropriate materials.
Due to the functional nature of this object and the stresses involved during use, print quality, material selection, and correct assembly are critical factors. Improper printing settings, weak materials, or poor layer adhesion may result in structural failure and potential injury.
For best results and safety, the use of high-quality, reinforced filaments for the frame (such as PETG-CF or equivalent) is strongly recommended. Lower-grade materials may significantly reduce strength and durability.
Always inspect all parts before use. If any cracks, deformation, or weaknesses are detected, do not use the model.
⚠️ Usage Warning
Slingshots are not toys and can cause serious injury or damage if misused.
Always wear appropriate eye protection and operate in a safe environment. Never aim at people, animals, or fragile objects.
Use only suitable and safe projectiles.
Use at your own risk.
📜 License & Usage Terms
This model is provided for personal use only.
The following is strictly prohibited:
- Modifying, remixing, or creating derivative versions
- Redistributing or re-uploading this model or modified versions
- Commercial use of any kind
All rights are reserved by the original author.
⚖️ Disclaimer
By downloading and using this design, you acknowledge that you are solely responsible for the manufacturing, assembly, and use of the final product.
The author assumes no responsibility or liability for any damage, injury, or misuse resulting from the use of this design.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (128)