Kar Fai

cover

plate_1.png

2025-03-06_db21155afff7b.jpg

Screenshot 2025-03-06 at 9.54.16 PM.png

Updates:(14.03.2025) - adjusted tolerance of plug cut out for fitting issue on some plugs.&nbsp;Please clean bed with alcohol wipe and let it dry before print.

0.2mm layer, 3 walls, 20% infill

ItsMeAidanYT

IMG_2662.jpg

temp.JPG

IMG_2661.jpg

IMG_2663.jpg

IMG_2665.jpg

IMG_2673.jpg

<ul><li>0.2mm Layer Height</li><li>2 walls</li><li>Supports enabled (regular auto)</li><li>Use the 2 screws already holding the heat bed in. It may take a bit of force to thread through the printed piece, but it should work. If you need a video, I have no problem helping out!</li><li>Continue to use the old chain, printed with the original print profile, you may have to lengthen/shorten it based on your cable</li></ul>

Bed Mounting Piece For Beds without 3 screw holes

Minalai

Anhang 1.jpeg

Screenshot 2025-03-29 214906.png

Entfernung des Randes, damit der Netzstecker passt

Edge removal to accommodate the power plug

0.2mm layer, 2 walls, 15% infill ohne Rand

conex68000

IMG_1887.jpg

IMG_1889.jpg

IMG_1886.jpg

I bought the A1 in Japan in June 2025, but its plug didn’t fit the original model’s hole, so I had to enlarge it.&nbsp;

The part with an enlarged hole

Improved by Masken

MaskenNetwork

photo_2025-12-26 21.32.14.jpeg

photo_2025-12-26 22.26.46.jpeg

I realized this print profile merging different print profiles and settings.&nbsp;Specifically, I horizontal oriented all the pieces, used the @conex68000 for the enlarged hole for the EU plug and I created a circular groove where the Y-hook rests on the printer body.&nbsp;In my case I have the 3 screw holes under the plate so I used the original desing to attach that part.&nbsp;I used the 0.2 Standard preset with the following changes:3 wall loops20% infillGyroid infill patternOn build plate only support

More suitable for EU socket and horizontal oriented print

mikee_be

1.jpg

4.jpg

3.jpg

2.jpg

6.jpg

5.jpg

UPGRADE Aliged Bed Mounting Piece For Beds without 3 screw 

Juan

SCR-20260427-mhoz.png

This is a complete profile for easier printing with the original pieces from the designer but using the bed mounting without screws from @mikee_be&nbsp;0.2mm layer, 2 walls, 20% infillSupports enabled

Full profile including bed mounting without 3 screws

Raveman

A1_Heated_Bed_Chain_Bracket_V2.png

IMG_7312.jpg

IMG_7317.jpg

Improved cable chain bracket for EU version power plug. Also changed from star shaped design to flat and added bambu logo, because some printers don&#39;t have that part on the backside to safely attach the bracket. I used double sided tape to more secure the bracket.

Chain Bracket V2 improved power plug fit

FORMFABRIK

IMG20260505093116.jpg

IMG20260505093121.jpg

Full Bed Chain with mounting no screws and with EU Mount&nbsp;I take the Template from @juanbe and add the EU Plug from @maskennetwork &nbsp;I printed it with Bambulab PLA Mate Black

a1-bed-chain-with-mounting-no-screws with  EU mount

lc3d

WhatsApp Image 2026-04-22 at 00.08.42.jpeg

Parte negativa para pino limitador.PNG

Capturar.PNG

Removing the plug&#39;s edge and adding and addition of a negative circle to the base of the pin<ul><li>0.2mm layer height</li><li>Sparse infill density 15%</li><li>2 wall loops</li><li>Support enabled (negative side for pin insertion)</li></ul>

Addition of a negative circle to the base of the pin

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you like my design, please boost my work!</boostcontent></boostme>The print profile shared is slightly slower but it&#39;s set to be the most stable and lowest risk of failed print. For best print outcome, PLEASE clean your build plate with alcohol wipe for best bed adhesion/print outcome.&nbsp;A1 Bed drag chain mount parts list:Bed mount - 1Base mount - 1Drag chain &amp; Clip - 18 (add or remove chain to adjust slack of cable)  &nbsp;Additional shorten clip to fit and adjust length for slight difference in cable length.+4mm chain link and clip-4mm chain link and clip<img class="image_resized" style="width: 55.53%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000001181010/design/2025-03-06_b9438d66bdd49.png">

A1 Bed Drag chain / Cable Chain

ASIA

Print Profile(10)

Description

Comment & Rating (2384)

License

Related Models