Milwaukee Packout - 3 Drawer - Wide Divider Ends

MILWAUKEE PACKOUT - 3 DRAWER - WIDE DIVIDER

Milwaukee Packout stock drawer dividers can be limiting to say the least. Especially when it comes to storing large hand & power tools. Your options are front and back depth, a grid or NOTHING (ie. Chaos)... 

Here's your solution: A divider that spans the width of the drawer. Print the Ends that slide into the drawer wall slots and connect them with the printed stretcher. A Channel is cut in each part to accept a 3/16 (5mm) piece of plywood or aluminum to create the body of the divider, giving you a very sturdy wall to protect your valuable tools in transport and keep you organized. 

Assembly consists of 2 ends and 2 contoured stretcher pieces all connected with dovetail joints, as pictured.  

You will need in addition to your printed parts a piece of  3/16 (5mm) plywood (pictured above) or aluminum sheet that creates the body of the divider. 

Cut dimensions are: 15.1875" x 2.6875" or 385 x 68 mm

All pieces should be oriented upside down in the slicer and supports will need to be enabled for stretcher prints. 

HAPPY PRINTING