Creality K2 Plus Replacement Back Panel Standoff
Print Profile(0)
Description
Summary
This is a simple parts to replace damaged Creality K2 Plus back panel standoffs. Like many of you my new K2 Plus arrived with a little damage. I didn't even notice this was broken until I went to perform input shaping and the back of the machine started to rattle like crazy. The back panel must have been hit and it broke off several of the standoffs pressed into the sheet metal. I lightly glued these into the holes from the back of the panel and replaced the flat head screws with button head screws. Regular cap screws would work but you would need to add washers.
Update: I added a printable washer with a countersink that will work with flat heads.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)