Mini ITX PC case
Print Profile(1)
Description
3D printable PC case for a mini ITX motherboard, SFX power supply, GPU of a simmilar size to a RTX3060 and for a fan dimensions 120x120x15-25 mm.
Only parts you need to buy are 16 magnets size 6x1 mm and M3 heatset inserts.
For most of the assembly of the plastic parts I used epoxy glue and superglue for the magnets and the stands.
Parts named L are on front of the motherboard and named R are on the rear of the motherboard.
Upper and lower housing are positioned together with 2 round pins and 2 triangle pins (which are different sizes!), I glued in the pins and also the touching sufaces of the housings.
The bottom clear honeycombs are a bit harder to insert, but it goes together once you get it. the other honeycomb parts fit together without any problems.
The button is made for a reset switch, tolerances are a bit tight so beware. The buttons inner housing also has a hole for a 5 mm LED but i did not install it on mine.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (16)