Foldable display stand for Speed Champions F1 cars - Free 3D Print Model

Search models, users, collections, and posts

RacingBrick

Hobby & DIY>Other Hobby & DIY

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

47 min

1 plate

4.9(366)

0.2mm layer, 2 walls, 10% infill

46 min

1 plate

4.7(11)

Open in Bambu Studio

Boost

1701

3374

537

406

4 k

2.9 k

Released

Description

Print-in-place, foldable display stand for Speed Champions F1 cars

Show off your Speed Champions F1 cars in style with this display stand! Designed for easy 3D printing, it prints flat in a single piece and unfolds into shape - no assembly required. The adjustable angle lets you find the perfect display position, while the two front studs provide a secure spot for the driver.

The stand is compatible with all Speed Champions F1 cars released between 2024 and 2025, as well as certain other cars. Please note that the cars released between 2020 and 2023 have a base with slots that fit on the stand, but the connection is less secure than the base of the F1 cars. The compatible set numbers per year can be found below:

2025 - 77242, 77243, 77244, 77245, 77246, 77247, 77248, 77249, 77250, 77251

2024 - 76922, 76925, 76919

2023 - 76917

2022 - 76912, 76911, 76910, 76909, 76908, 76907,

2021 - 76903, 76905, 76904, 76902, 76901, 76900

2020 - 76899, 76898, 76897, 76896, 76895

Boost Me (for free)

It means a lot, thank you!

Comment & Rating (537)

@Luke888

Print Profile

0.2mm layer, 2 walls, 15% infill

Strength Issue:PLA prints are prone to breakage

Support Issue:Difficult to open

Show original

@user_759041451

Boosted

Support issue? No support needed here.... There are over 300 five star reviews as you see. Chances are the model is ok, your printer, or print profile needs some attention. By the look of it is an ender3. Those tend to overextrude.

@sidee

you do know you can chose to print this in PETG. you dont have to use PLA if you dont want too

@sidee

Replying to @sidee :

just change it here

@theo575

Print Profile

0.2mm layer, 2 walls, 15% infill

Really great design, printing perfectly and holds the cars up at a perfect angle. Thanks for this!

The profile uploader has replied

@racingbrick

Thank you!

@LIKE_A_PR3DAT0R

Thank you soo much for this stand, it's amazing!! I Just printed the Large Gap one on a Ender 3 Pro and it come out really good , at first i was scared to break all, but then the joint start to move, the only problem i had was the pin for the minifigure , i had to file a bit the top and back part (maybe because of the Z seam ) to let the minifig enter

The designer has replied

@racingbrick

Thank you for the feedback, glad it worked!

@LIKE_A_PR3DAT0R

Replying to @racingbrick :

printed another 2 ! (only had a problem with the last one because i changed filament from pla to petg and the base kinda fused and i broke up all the pieces, but that was my faults since i forgot to re calibrate the printer xD ) Btw , i was thinking something , maybe it's just a stupid idea , but what about a support (or maybe a second version of this base ) to put on top of the slot of the minifigures with a little tower to put on the helmet? (i created an example with studio to explain it better ) in this way we can display the minifig without the helmet and without loose it around :D