Traffic Cone - Fidget Spinner Clicker - Free 3D Print Model

Search models, users, collections, and posts

hugo.workshop

Toys & Games>Other Toys & Games

IP Report

Print Profile(1)

All

P1S

H2D

P2S

X1 Carbon

H2D Pro

X1E

A1 mini

H2S

P1P

H2C

X2D

A2L

0.2mm layer, 2 walls, 10% infill

Designer

1.5 h

2 plates

4.9(58)

Open in Bambu Studio

Boost

560

1418

958

535

Released

Description

Welcome to the most fidgety, clicky and spinny of all cones, the…

Traffic Cone Fidget Spinner Clicker!

Just 23 grams and 53 minutes for multi color, or 38 minutes for single color.

This fidget spinner clicker in the shape of a traffic cone clicks very LOUD and spins fast, just hold the top to spin the base, or hold the middle to click the base.

Fully print-in-place with no supports!

In the print profile there are 2 plates, one for AMS and one for single color. If you don't have AMS but want multi color, add pauses for filament change at layers 51, 125, and 205.

On first use, be sure to rotate the base hard against the middle part to release the clicker from the internal seams.

If you like Traffic Cones like I do, check my other cone inspired designs below!

Boost Me (for free)

If you printed and liked any of my models, a boost or a follow are very much appreciated :)

Membership

Thinking about selling some of my models? I have a commercial license available, starting at $12 usd.

Join

Comment & Rating (78)

@user_1880732723

Great print. I loved it. Printed 2 variants. One in the actual size and one scaled down to 50%. the mechanism is not working in scaled down print. I am not using an AMS. Changed filaments manually by adding pause. could you help me to get the mechanism work after scaling down

The designer has replied

@hugo.workshop

Hi! What happened with the smaller one is that when scaled down, the clearances also scale down, making the space between parts too small to print in place, so the mechanism fuses. I used 0.25mm clearance between parts, so for the small one translates to 0.125, which is way too low to have separation.

@notcloud

Replying to @hugo.workshop :

I print with 0.1mm tolerances with a 0.4mm nozzle all the time and they work fine. But if they really don't work, could you maybe make a version that is printable at 50% scale? That would be absolutely amazing and I'll give it a boost Thank you!

@vintagekel

Boosted

Print Profile

0.2mm layer, 2 walls, 10% infill

Husband is giving these to his coworkers. Great print! Thanks.

@angrykilobyte

Print Profile

0.2mm layer, 2 walls, 10% infill

Great print!

@turnipdezain

Print Profile

0.2mm layer, 2 walls, 10% infill

this is the smoothest (texture wise), even the tower is sooooo smoooth! excellent design. unsure if it was the design or the fact that i just printed and installed the fan deflector. either way, really niiice!

@AllyBerg

Print Profile

0.2mm layer, 2 walls, 10% infill

LOVE IT!

@user_640733883

Print Profile

0.2mm layer, 2 walls, 10% infill

love it. looks amazing

@nbrewno

Print Profile

0.2mm layer, 2 walls, 10% infill

Really a great print. now I can block off areas at work to keep people away

@Chipy3D

Print Profile

0.2mm layer, 2 walls, 10% infill

Perfect print profile! Thank you very much for a good design!

Show original

@latajacy0slimak

Print Profile

0.2mm layer, 2 walls, 10% infill

good

@TouchMyMonkey

Print Profile

0.2mm layer, 2 walls, 10% infill

Perfect!!!

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.