Modular Door Hook System
Print Profile(1)
Bill of Materials
Description
This is a modular door hook system designed to be clean, minimalist, and strong enough to hold up most things without bending!
There are three lengths of door hooks: 125mm, 140mm, and 160mm. The doorhooks can be connected together with a series of connector bars, which space the door hooks apart by 120mm. Each door hook is designed to fit a standard 36mm thick door. I've also included versions of the door hooks without pinholes.
I printed this with Bambu Wood PLA using the 0.16mm Optimal profile w/ supports. The pins may be a slightly tight fit in order to make sure the door hook system is solid, so just give it a little extra push to get it in there :)
Boost Me (for free)
If my design was useful to you, I would very much appreciate your boost! .STEP files are provided on all of my posts :)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (12)