Search models, users, collections, and posts

IEM Case

VelocityOS
Hobby & DIY>Music
IP Report

Print Profile(1)

All
P1S
P1P
X1
X1 Carbon
X1E
A1
A1 mini
H2D
H2D Pro
H2S
P2S
H2C
X2D
A2L
0.16mm layer, 2 walls, 15% infill
0.16mm layer, 2 walls, 15% infill
Designer
2.9 h
2 plates
4.9(55)
Open in Bambu Studio
Boost
213
651
63
27
1.2 k
893
Released 

Bill of Materials

Bambu Filaments
Select all
Black (33102) / Refill / 1 kg
PETG HF
x1

Description

This is a simple twist top IEM case. The threads are silky smooth and there is knurling around the outside for grip while opening. 

 

Inside dimensions:

Height: 27mm

Diameter: 68mm

iem
iem case
iem holder
audio
audio accesory

Comment & Rating (63)

(0/1000)
@Sungo
Print Profile
0.16mm layer, 2 walls, 15% infill
it printed like a charm. I embossed a text in it so I can identify my case :D from now on it will never leave my gig bag :D
profile
1
Reply
@Chris_Spe
Printed great on P1S. Also worked for IEM's with thicker headphone cable.
(Edited)
0
Reply
@CrazyTbird
Absolutely useful. made it for my custom Hoerluchs HL-5210. I just cut down some felt and secured it with double-sided tape. Small notice for the future: If I ever print it again I would make the seam position to random.
0
Reply
@Pomidorowy_Krul
Very nice and portable case. It feels good and prints well without supports (though a bit of lube is necessary). The only issue is that I feel like I’m about to squish my cable when closing it. I made an insert that lets you loop your cable around it, so you won’t pinch the cable when closing the case, and I uploaded it to MakerWorld. If you like, you can use it as I do. Cheers — great case!
(Edited)
0
Reply
@jammerx19
Boosted
Works great, nice design!
(Edited)
0
Reply
@WallnutPapaya
Boosted
Print Profile
0.16mm layer, 2 walls, 15% infill
Very good
0
Reply
@jtsalagi
Print Profile
0.16mm layer, 2 walls, 15% infill
Good design! Printed great and the two halves fit together very well.
(Edited)
0
Reply
@LarsKotzur
Print Profile
0.16mm layer, 2 walls, 15% infill
printed with translucent and black PLA had slight stringing issues, but I believe that was due to my filament and less to the print profile 10/10, it's coming with me on tour starting tomorrow
Show original
0
Reply
@Forkliftman9000
Print Profile
0.16mm layer, 2 walls, 15% infill
Printed perfectly!
0
Reply
@Airgnox
Print Profile
0.16mm layer, 2 walls, 15% infill
Convenient for small items I use it for magnets
Show original
0
Reply

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Slim Passport Case
Slim Passport Case
Wet PLA Guru
14.2 k
7.5 k
Flexi Corn Cob - Pencil case
Flexi Corn Cob - Pencil case
3dnetic
16.9 k
5.6 k
Q-tip travel case
Q-tip travel case
FlugtN
13.1 k
5.1 k
Toothbrush Travel Case
Toothbrush Travel Case
angrelou
34.7 k
9.2 k