Tiny clamp for phone repair & more!

I needed a simple and small clamp to hold screens on phones after replacement. I designed this kind of clamp taking inspiration from the ones available online. Use them for what you need and share it!

(the metal srew is optional!)

Here is how to assemble it! (after you have removed all the support material)

1. Lubricate the screw with grease or oil and “unsrew” it for it's entire lenght (it's counterclockwise)

   

2. Do the same for the round hole present on the clamp main part and insert the assembly you just made

   

3. If you don't have the optional metal srew apply a dot of glue on the square end of the plastic screw

   

4. Close the clamp all the way for easier handle installation, once done press in all the way the handle (add the srew if you have it)

   

5. Keep the clamp closed and add a thin layer of glue inside the cut near the edge (on both sides)

   

6. Add the carter inserting the edges in the glued cuts

   

7. Use a clamping device to keep the carter inserted all the way in (use aluminium foil or oven paper to prevent unwanted sticking)

   

YOU FINISHED!!! ENJOY YOUR NEWLY PRINTED AND ASSEMBLED CLAMP!

Let me know if you have troubles or if you need modifications to it!