Search models, users, collections, and posts
Smart Video Doorbell
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
9.5 h
4 plates
Open in Bambu Studio
Boost
27
59
4
2
28
2
Released
Bill of Materials
Bambu Filaments
Select all
List other parts
- Microcontrollore ESP32 D1 Mini x 1:
- Led (RGB o Bianco) x 1:
- Ring Video Doorbell wired x 1:
- Lettore impronte GROW R503 x 1:
- Display e-ink Waveshare e-paper 2.13inch HAT x 1:
Description
Content has been automatically translated.
A smart video doorbell for home automation, connectable to Home Assistant via ESPHome firmware installed on an ESP32 D1 Mini.
PETG parts to be printed:
- Main body
- Front panel with all electronics
- Weatherproof cover
- Reflector and cover for RGB light
A translucent material is required for the reflector to allow the nighttime illumination to filter through.
I have published the original Blender files and the STLs, allowing you to modify them as desired.
I have also published the ESPHome file to be uploaded to the ESP32.
I PROVIDE NO SUPPORT AND ASSUME NO RESPONSIBILITY FOR THE USE YOU MAKE OF THE PUBLISHED FILES.
USE AT YOUR OWN RISK!!!
home assistant
video intercom
esphome
esp32
e-paper display
fingerprint reader
doorbell
ring doorbell
fingerprint sensor
display e-ink
doorbell
waveshare
grow r503
domitica
esp32 d1 mini
rgb led
Documentation (1)
Other Files (1)
videocitofono.yaml.txt
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (4)