Exhaust System Blast Gate 50mm High Temperature with Slide - Free 3D Print Model

Search models, users, collections, and posts

Andi_Arbeit

Hobby & DIY>Other Hobby & DIY

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 25% infill

Designer

4.4 h

2 plates

4.8(29)

Open in Bambu Studio

Boost

399

1447

501

270

Released

Description

Content has been automatically translated.

Show original

Exhaust system part 3 (I am gradually making all the components of my exhaust system available):

The uploaded slide is designed to flexibly decouple devices within the exhaust system from the suction. The adjacent 50mm high-temperature pipes are plugged into this version. The holes have a diameter of 6.6 mm, so that M6 screws and nuts with washers can be used. The depth of the groove for the slide is designed so that it has sufficient friction when the screws/nuts are tightened hand-tight and does not shift on its own due to vibrations.

Comment & Rating (36)

@user_825163707

Boosted

Works perfectly Lightly sand the contact surfaces smooth and with some PTFE spray they glide wonderfully They also fit perfectly on the DN50 pipe

Show original

@Heiko.Stuhl

Print Profile

0.2mm layer, 2 walls, 25% infill

@Berb21

Boosted

Print Profile

0.2mm layer, 2 walls, 25% infill

Fits great. Could you tell me which filament or what exact color the blue is

The profile uploader has replied

Show original

@Andi_Arbeit

Hello, This is a matte dark blue from Elegoo: https://www.elegoo.com/products/pla-matte-filament-1-75mm-colored-1kg?variant=43605375418507

Show original

@Berb21

Boosted

Replying to @Andi_Arbeit :

Great. Thank you very much for the quick response. It's a great color

Show original

@Toolsinnig

Print Profile

0.2mm layer, 2 walls, 25% infill

I find everything I need for expanding my dust extraction system from you Many thanks for sharing

The profile uploader has replied

Show original

@Andi_Arbeit

Very gladly! A few more things are still in the pipeline... Due to time constraints, it will take a little longer... But everything will be uploaded as well

Show original

@user_4077552935

The image shows an interesting pipe clamp in the upper left corner Where can I find it? A tip would be greatly appreciated

The designer has replied

Show original

@Andi_Arbeit

Hi, this is a clamp designed by an acquaintance of mine: Super_Laserkatz https://makerworld.com/en/models/134093-dn-50-ht-rohrschelle-mit-schnellspanner#profileId-870079 Best regards

Show original

@radstein

Print Profile

0.2mm layer, 2 walls, 25% infill

Necessary support at one contact area leads to surfaces, that have to be grinded after printing.

@user_393207232

Print Profile

0.2mm layer, 2 walls, 25% infill

Perfecte werking

@papaskreativeW

Boosted

Print Profile

0.2mm layer, 2 walls, 25% infill

Very good, fits perfectly with the HT pipe. Print ran smoothly and without issues. Thanks for the model

Show original

@Gulle

Boosted

passt perfekt, danke!

@user_952730168

Boosted

Print Profile

0.2mm layer, 2 walls, 25% infill

fits perfect

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.