Search models, users, collections, and posts
QRP Labs Dummy Load Case
Remixed by
IP Report
Print Profile(2)
0.16mm layer, 3 walls, 15% infill
Designer
1.8 h
2 plates
No artifacts, 0.16mm layer, 3 walls, 15% infill
2.2 h
2 plates
Open in Bambu Studio
Boost
10
20
11
5
60
45
Released
Bill of Materials
Maker's Supply Kits and Parts
Select all
Description
This is a case for the 20w QRP Labs Dummy Load. I really liked the case design by GM5DNA, however I wanted to make some changes.
This includes some simple modification for some text and some smoothing out and chamfering of edges.
More importantly, you can now assemble this case with four M3 SHCS 8mm or longer.
Please print in PETG, as it can get hot under 20w usage. I recommend Lance's print profile, as it comes out significantly smoother than the stock one.
As shown in the picture, first secure the lid to the BNC connector using the included lock washer and nut, then attach to the body using four screws.
I used TheIceBurge's Glass PETG settings for the lid.
This remix is based on
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (11)