A1 Mini Wyze Cam Mount

I got the idea to model this from JohnPepsi Wyze cam V1/V2 mount… I spent about 2 hours measuring the printer, camera and then modeling in Shapr3D.

I asked JohnPepsi if the Wyze OG camera would work, but it turned out it wouldn't so here I am sharing this for these who wish to use a OG Wyze Cam.

It's a nice snug fit for the camera and for mounting to the gantry on the A1 mini.

My v1 test print I did print with 2 walls, 15% infill (Gyroid) and with tree supports, but I had to make two adjustments to the mount so when I printed the V2 mount I used 100% infill… Probably not necessary, but I wanted it that way.

The way the .3mf Places the part is the way I printed it and with the normal supports instead of tree the bridging looks great, and removal was almost to easy. Any way, I wanted to thank JohnPepsi for creating the original and inspiring me a bit. I hope you all enjoy