Soap Tray - With Optional Drip Tray

gold looks fab! printed with Elegoo pla matte (beige) and im happy but gold is gold:))) what’s your gold filament?

yes! 🙌🏼 your beige color looked really nice and I didn’t have it, but it inspired me to use my gold! I used the Bambu Labs PLA metal irridium gold filament!

thanks! it turned quite good:) I need that irridium gold in my arsenal:)

Thank you! I'd love to see your marble print! Please consider giving me a follow and checking out some of my other models also

I updated it and here are the white marble that was made. my mother loves it a lot when I printed it lol

I’ve actually just released my new kitchen caddy version. This version features 3 different sizes and some additional features. Please check it out here https://makerworld.com/models/1233077 Please consider giving me a follow and a boost also!

is that metal pla? or silk? Just started one of these with copper silk

It's copper silk from STLFlix filaments

Love the Filament!

Thank you! Do you mind if I ask what the issue was specifically if you didn't print them separately and didn't slow them down? I might put up an A1 mini specific profile to fix those issues. Please consider giving me a boost and a follow and checking out some of my other models also

This was the first time I printed. The base was fine, but this is how the upper portion printed. Slowing it down let me print the top portion fine. When I printed the next two I just printed them separately because I didn’t have the time to babysit it for the first few layers. I spent a lot of time making sure my printer was not the issue, but only one other item had a similar issue and it was printed days later. I also had to slow that print down to successfully print that item. I am still not sure there is not an issue with my printer. (New to this) The filament is not wet, I wash my plate often, and the nozzle is not plugged. Those were the 3 major things that I found that seemed to cause similar issues according to my research.

Hi. Thanks for the feedback. To me this definitely sounds like a bed adhesion issue rather than a filament issue. As you said that you regularly clean your bed, my guess would be one of the following. Drafts: Is the printer located in a temperature controlled environment or is there a regular draft blowing from one direction. If so does this coincide with where your failures are occurring? Printing with a raft or an outer protection wall would help with this issue if the drafts cant be avoided. Bed Placement: I personally hate the Bambu design for plate guidance. Those little guides at the back are very easy to accidentally place your plate on. I've done this so many times resulting in the back left or back right being slightly lifted. This obviously means that the bed isn't level and also isn't in contact with the heater, resulting in poor adhesion. Bed levelling: If your automatic bed levelling isn't run, or isn't capable for accommodating for the variance in your Part Placement: Obviously when you print both parts it pushes them to the outer parts of your plate. Your bed will naturally have a more consistent temperature in the center, especially with the A1, A1 Mini and PIP as they are very susceptible to draft winds impacting bed temperatures. In general if this is something you regularly encounter, I'd suggest printing with rafts and upping the bed temperature by +5degrees, then as you have already done, slowing down the first few layers to ensure good adhession. Thanks for the feedback and I hope some of the above tips can help you! I might set a A1mini profile with those factors implemented to ensure a greater success rate on the A1 mini.

Thank you for the review and the boost. Looks like a very clean print! Please consider giving me a follow and checking out some of my other models. If you’re looking for another functional accessory for your bathroom, I’ve just released my Shower Screen Towel Hook. It’s designed to hook over 8-12mm thick shower glass screens and hold up to 3 towels. Please check it out here. https://makerworld.com/models/1723165 I've just released a brand new overengineered mechanical razor holder for the bathroom. Its a really fun and simple mechanism and works great! You can check it out here. https://makerworld.com/en/models/1779583-mechanical-razor-shaver-holder-fidget#profileId-1895539 I've got some exciting accessories due to be released soon, and some new light designs which I'm excited to share with you all, so please do give me a follow.

Thank you! I'd love to see them! Please consider giving me a follow and checking out some of my other models also

Thank you.

I’ve actually just released my new kitchen caddy version. This version features 3 different sizes and some additional features. Please check it out here https://makerworld.com/models/1233077 Please consider giving me a follow and a boost also!

Thanks for the feedback. I'll make an XL version for those larger soaps

I've Uploaded an XL Version (30% bigger) which is big enough for the largest soap I have found and most of the "Artisanal" square blocks I have also seen. The regular version is still suitable for 90% of the the soaps from supermarkets I have seen

I’ve actually just released my new kitchen caddy version. This version features 3 different sizes and some additional features. Please check it out here https://makerworld.com/models/1233077 Please consider giving me a follow and a boost also!

Thank you for the review. Looks great! Please consider giving me a boost and a follow and checking out some of my other models. I've just released a brand new bedside table lamp design. If you have one of the Bambu LED kits or are interesting in printing your own light, please check it out here. https://makerworld.com/en/models/1547432-adjustable-bedside-table-lamp-led-kit-001#profileId-1624982 I've also got a kitchen caddy version of this design with some additional sizes and features and design options. Please check it out here https://makerworld.com/models/1233077 .

boosted ;)

Thank you for the review. I love the silk gold colour. Please consider giving me a boost and a follow and checking out some of my other models. I've just released a brand new bedside table lamp design. If you have one of the Bambu LED kits or are interesting in printing your own light, please check it out here. https://makerworld.com/en/models/1547432-adjustable-bedside-table-lamp-led-kit-001#profileId-1624982 I've also got a kitchen caddy version of this design with some additional sizes and features and design options. Please check it out here https://makerworld.com/models/1233077 .

Apologies, download unavailable

Thank you! Great Colour! I’ve actually just released my new kitchen caddy version. This version features 3 different sizes and some additional features. Please check it out here https://makerworld.com/models/1233077 Please consider giving me a follow and a boost also!

Will do!