Raiders of the Lost Ark Hueforge 150 x 113 mm
Print Profile(1)
Description
Raiders of the Lost Ark Hueforge in 150x113mm.
Mit AMS 4 farbig gedruckt in Schwarz, Rot, Orange und Gelb.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150x112.5mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3mm and the Actual Depth is 3mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Orange Transmission Distance: 7
PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #13 (1.12mm) swap to Orange
At layer #20 (1.68mm) swap to Yellow for the rest.
Boost Me (for free)
Boost, um mich zu unterstützen.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)