Tire Tread Depth Gauge V3 - Print in place
Print Profile(6)
Description
First of all, I would like to thank you for your interest in the initial gauge.
I have created a more compact version with a slightly different design.
It can measure tread depths up to 17 mm. It only takes 21 minutes to print.
For most European countries the summer tread depth allowed is 1.6 mm. For the winter season 4 mm. In the colored version, these two depths are printed in red.
Print settings:
- Layer height: 0.16 mm
- Wall generator: Arachne
- Minimum layer width: 75%
- Layer width: 0.4 mm
- Precise Z height: Enabled
- Seam position: Aligned
Note: I recommend to draw the seam manually to avoid seam joints between the two bodies.
Check my new model:
https://makerworld.com/en/models/1125964#profileId-1125281
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (925)