Cave tiles (OpenLOCK system)

Build your own cavern/cave and let your adventurers explore paths leading to new loot (or new enemies?)

I remixed the original tiles adding an Openlock triplex base you can click the tiles together in a limitless configuration of your choice. This way you can build the terrain easily and don't have to be scared the tiles get pushed around.

I added aditional beams, because I found that printing the big ones without them gives a very bad texture at the bottom. And if I put the time and money in tiles, I want them to be pretty and sturdy.

Instructions:

• Print the tiles of your choice.
• Remove the small supporting pins on the sides.
• Print Openlock clips to connect the tiles.
• Push one or more Openlock clips into the tiles (depending on the size of the tile 1 can be enough, 2 works best with big tiles).
• Connect the tiles together.

Building your own cave? Use these components: 

• Tiles
• River tiles
• Cave opening
• Stairs
• Corners
• Diagonals
• Stalagmites
• Wall with hole
• Walls
• Wall ending
• Elevated wall
• Elevated blocks
• Elevated corner

Edit 25th of April: added a 8x8 inch tile by request. Sadly this is to large to print on the A1 mini.

Also added 1x3 and 2x3 sized tiles.

Together 3D has a commercial license for using the OpenLOCK system. More info can be found on www.printablescenery.com