Search models, users, collections, and posts
Ice Dragon Bookmark
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
2.1 h
1 plate
Open in Bambu Studio
Boost
3
3
0
0
1
1
Released
Description
Ice Dragon Bookmark
2 sizes dependng on the book.
Created using AI and Hueforge
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 50x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 1.7mm and the Actual Depth is 1.8mm
Filaments Used:
PLA BambuLab Black Transmission Distance: 0.4
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Blue Transmission Distance: 5
PLA BambuLab Basic Jade White Transmission Distance: 4
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Red
At layer #13 (1.12mm) swap to Blue
At layer #15 (1.28mm) swap to Jade White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)