Tumbler Chapstick Holder Keychain
Print Profile(2)
Description
This was printed with the AMS. Using silver silk pla for the top rim and basic pla for the body. The silver silk really makes the top rim look like stainless steel. I have designed the lid in way that when it is closed it stops in roughly the same place every time. As shown in the pictures.
** I have designed a tool to assist with putting the piece on top of the lid to prevent breaking. **
*** Update 4/9/25 *** I have added another plate to the print profile. This plate has lid parts 1 & 2 combined into one part for printing with the AMS. ***
*** Update 2/10/26: I have had several requests to have a hole added to the tumbler for the keychain loops. I have now added a new print profile for this that now has a hole for keychains.
*** Update 3/15/26 *** Hole for the color piece that goes on the lid has been adjusted so it is easier to install now. ***
***Highly recommend to turn on Contour Scarf Seams on your filament in Bambu Studio. This will help eliminate noticeable seams.***
Slow down for overhangs turned on.
Recommend to use supports for the handle.
You may have to paint the top rim of the tumbler 3.0mm silver in Bambu Studio using the Color Painting tool and selecting the “Height Range” option.
The tolerances for the piece that goes on the lid is pretty tight. May take a little force to get it all the way down on straw. I attached with a couple dabs of super glue. ** Tool to assist with attaching this piece is now included in print profile. **
Thanks for choosing our designs! Show off your work — leave a review and upload a photo of your printed model so others can see what you’ve brought to life.
Membership
If you’d like to sell 3D prints of our designs, you can grab a Commercial License right here on MakerWorld or Patreon. Your support truly helps us continue creating, refining, and expanding our collection of models. Thank you for helping us keep these designs alive and improving!
You can also get a commercial license from our Patreon page here:
https://www.patreon.com/OwlAmazingCrafts
Boost Me (for free)
Love what we’re making? Give us a Boost to help us keep bringing new designs your way. Thanks for the support!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (152)