A1 Cable Guide (and A1 Mini)
Print Profile(2)
![[Strong+Fast] 0.24mm layer, 4 walls, 20% gyroid infill](https://makerworld.bblmw.com/makerworld/model/USbf5dd554a6277f/77051776/instance/2024-04-12_fc763c88c36d4.jpg?x-oss-process=image%2Fresize%2Cw_100%2Fformat%2Cwebp)
Description
Update 6/25/24: Updated geometry to be a more secure fit and also fit A1 Mini (big thanks to Aleks89 for feedback and testing on the Mini).
After the 3rd time my cable snagged on the upper frame, I decided to make a quick cable guide. I'm not sure why this wasn't included in the printer design as it seems like it would be a common issue even with the recommended AMS locations.
There are lots of ways you could achieve this, mine rides on the z axis and holds the end of the cable far enough in it doesn't snag on the corner of the frame.
It should snap into place with a little effort.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (658)