Customizabe AMS riser drawer

These drawers are for X1/P1 series printer AMS riser https://makerworld.com/en/models/19535#profileId-19420. The empty one adds nothing new and is there just so that you can have “same looking one”. The main difference is in the contents list and composition. My drawer also does not prevent you from pulling it all the way out, something that might cause you spilling the contents out accidentally, but it was necessary to make it possible to access contents in the back.

Note for P1 users, some of the slots are for X1-only parts that might be of no use to you, please consult the list and links below.

The drawer that is already assembled with slots for things (based purely on stuff I have and wanted to put in there):

• 12x A1 wiper pads that I use for https://makerworld.com/en/models/131017#profileId-152653 (https://eu.store.bambulab.com/en-cz/products/heatbed-nozzle-wiper-a1).
• 1x clog needle in its original glass ampule.
• 3x allen wrenches,  in sizes 1.5 (max 78/25), 2 (max 131/25), 2.5 (88/25), I do believe they are the ones that came with the printer, but it could be a mixup with some I had lying around.
• 4x PTFE couplers (https://eu.store.bambulab.com/en-cz/products/ptfe-tube-coupler).
• 8x silicone socks for the hotend (https://eu.store.bambulab.com/en-cz/collections/spare-parts-for-x1-series/products/silicone-sock-for-hotend).
• 18x grease packets (either lube or thermal). You will get all the thermal grease packets you'll ever need with the hotends, might be useful storage for the lead-screw grease (https://eu.store.bambulab.com/en-cz/collections/spare-parts-for-x1-series/products/lubricant-grease).
• 1x extruder filament sensor (https://eu.store.bambulab.com/en-cz/collections/spare-parts-for-x1-series/products/extruder-filament-sensor-x1-series). At the time of making this drawer I was dealing with issues with the sensor, so I got the spare, never needing it in the end. It's just a 30x40 box, it'll fit plenty other things.
• 12x extruder nozzle clip. Not sure why I have so many (more than hotends).
• Assorted junks such as screws, 45x45 box with rounded bottom.
• 4x bare hotend with screws (https://eu.store.bambulab.com/en-cz/products/bambu-hotend-x1c?variant=48790368813404).
• 3x assembled hotend, hotend+clip+thermistor+ceramic hearer+silicone sock+screws. These are for your daily hotend swapping needs, you do not want to be dealing with the thermal grease every time. Realized it too late that I should've gone with fans as well, but those are just two extra screws and you don't have to unplug them if they are not part of the hotend.
• 4x X1/P1 nozzle wiper (https://eu.store.bambulab.com/en-cz/collections/spare-parts-for-x1-series/products/nozzle-wiper).
• 9x filament cutter (fits both https://eu.store.bambulab.com/en-cz/collections/spare-parts-for-x1-series/products/replacement-filament-cutter)

Customizable

The second model of the drawer features a “blank” that has no holes in it. When you open it in BambuStudio, you'll see the drawer with gray parts scattered around it:

These are set as negative parts for this blank drawer. You can see them listed (aling with names) in the object panel on the left:

When you select an object, either by its surface, object list, or selecting it using the vertical blocks to the side, and move it along XY plane over the blank, it will get sliced into a hole (you won't see the effect until it slices, unfortunately). You might have trouble selecting/moving objects already placed because the blank interferes with the selection - in that case explicitly select the translation tool and use the arrow handles (or grab the corner box). Naturally, you can rotate the negative parts around Z axis (likely just 90° considering all the boxes are, well, boxes).

If you want to add your own model, just right click on the blank, select “add negative part”, and either insert one of the in-built shapes, or load stl of your choice.

Result of adding of “Rounded Rectangle” with size 220x164x32mm would look like this:

Unlike the parts I have already added, your parts need to have the correct height and Z offset to fit in the space of the box, which is 28mm high (that is what the top left boxes are primarily for on the negative parts).