X1C-P1P-P1S Nozzle wiper cleaning solution A1Strip by Tommy Gun

Tommy Gun

3D Printer>3D Printer Parts

Print Profile(5)

All

X1 Carbon

P1S

P1P

X1E

PETG-0.2mm layer, 2 walls, 15% infill

Designer

29 min

1 plate

4.8(74)

ABS-0.2mm layer, 2 walls, 15% infill

Designer

22 min

1 plate

5.0(21)

ASA-0.2mm layer, 2 walls, 15% infill

Designer

21 min

1 plate

5.0(5)

PC-0.2mm layer, 2 walls, 15% infill

Designer

21 min

1 plate

5.0(1)

Click to see more

Boost

332

785

196

849

622

Released

Description

-Works on X1c, p1s, p1p

-Also added strenght on the poop stop wiping angle, was breaking too easily

-Added a nozzle wiper stand to glue a A1 Rubber tab, cut one 3x and enjoy the best nozzle wiper out there !!

-Superglue it up to make sure it does not fall off ! strongly suggest you glue it before placing it in place !!! super glue is a printer worst enemy !

Rubber cleaner : https://ca.store.bambulab.com/products/heatbed-nozzle-wiper-a1

Also fits perfectly to have the ultimate nozzle cleaner wiper !! : https://makerworld.com/en/models/100450#profileId-107193

nozzle cleaner

nozzle wiper

hotend nozzle cleaner

hotend cleaning solution

Comment & Rating (196)

@Mr.Muu

Unfortunately, the model has two faults. 1. the part marked with the red arrow should be an arc so that it has the same shape as on the printer. As it is now, the part pushes forward and because it is then too long (because the outlet at the front of the printer is round) the sides bend in the middle (you can also see this in your pictures) This ensures that it can break, as in my case. I have cut away something at the front so that it does not come against the curve (marked with the blue arrow) 2. this creates a weak point and although I even made it out of PC, it can break (in my case after just one print) I strengthened it by making it round. (Marked with the blue circles). Hopefully it will hold like this. But I would recommend to correct your model. EDIT: meanwhile I fixed and uploaded the Model for anyone who is interested. As the Designer didn't want to fix it. EDIT2: Now he changed the License so that my fixed Version got deleted and and he also deleted his comments here. I am sorry for you guys.

(Edited)

@Mr.Muu

dude what is wrong with you? i Showed you how to improve your model and you react like this? just do the changes to your model and upload it as a v 2.1 or so. it didn't break while installing. Just look at your own Image! you will see that the tips are bent inwards. that means Stress on the part. fix these little things and everything is fine! i didn't even gave you a Star rating! i just want to help. wtf...

@Terrppss

Replying to @Mr.Muu :

some people take this makerworld stuff seriously lol

@xNets

Replying to @Mr.Muu :

did you have changed it yourself? can you share the file? 🤣🤣

@user_2925160602

Print Profile

PETG-0.2mm layer, 2 walls, 15% infill

Noce little upgrade, need to get the A1 wiper!

The designer has replied

@TommyGunOG

ty sir !!! i love it a lot too !!! appreciated !

@KarMar

Print Profile

ABS-0.2mm layer, 2 walls, 15% infill

100% Great 3D model

The designer has replied

@TommyGunOG

amazing work !! thansk for the rating !!! appreciated

@TommyGunOG

tysir !!! appreciated !!

@user_1896108163

Print Profile

PETG-0.2mm layer, 2 walls, 15% infill

Perfect🙏🏿🙃thanks

The designer has replied

@TommyGunOG

(Edited)

@user_3756112297

Print Profile

PETG-0.2mm layer, 2 walls, 15% infill

Other Issues:I used it for a while, but the filament kept getting hung on the left side as you look at it installed. Then it would build up into a big blob. So, I had to take it out.

The designer has replied

@TommyGunOG

thanks for the review, its something ive never ran into, and have it installed on all of my printers...sorry for the inconveniences, do you maybe have a wore out nozzle spewing out filament sideways ?? best regards

@user_3756112297

Replying to @TommyGunOG :

No. Printer only has 433 hours on it. I may try it again, but I was worried to leave it on a multi colored print. I'll take a Pic of what it was doing if it does it again. Thanks.

@TommyGunOG

Replying to @user_3756112297 :

433 hours is plently enough depending on what type of filament your using to have a wore off nozzle, specially if a stainless ....good luck