E-11 Blaster from STARWARS ANH 2 Versions

Found on Thingiverse:

E-11 Blaster from STAR WARS ANH

-Functional slide action

-Functional folding stock

-Functional trigger

-Removable magazine

-Disassemblable

-Functional fire control switch

-Functional reset switch on the Hengstler counter

I used PLA as it will only be a display piece

For cosplay use, I recommend using PETG or ABS,

or reinforcing the model with resin

I made a few adjustments to facilitate printing this excellent file:

-STR_SEL_NDX_modified: Added rounding for easier engagement, no ball needed anymore

-Set-screw dummy for the magazine, as I didn't have a suitable one

-STR_GRIP_FRM2 redesigned for an M6 nut

-STR_GRIP_FRM2 and STR_REC_MID2 combined to create a more stable alternative

You can choose between main body V1 or V2 in the print profiles

Some parts may require filing or sanding for a perfect fit

For a perfect look, I recommend sanding and painting the model, see instructions

For detailed instructions, please visit the original designer's page:

https://www.thingiverse.com/thing:3989097/files

Required parts:

Approx 10cm long 1mm wire for the rear sight, rear cap closure and counter button

4 x Small spring springs eg from ballpoint pens or similar

2 x M5x12 screw for mounting the scope

3 x Small self-tapping screws eg M2x6 with countersunk head for mounting the counter and rail

1 x M6 nut for the grip

1 x M6x15 Allen screw for the grip

2 x 1/4-20 X 3/4" Allen screw for the muzzle (alternatively I used M5 or M6x20 screws and glued them in)

1 x M5x8 set screw for mounting the trigger

1 x 1/4 X 3/8" set screw for the magazine

If you don't have the right screws, you can also glue these parts together and possibly glue in other screws