Jack Daniels Folding Door Box

If you find my designs interesting and useful, and would like to see more in the future, please consider giving me a boost and becoming a supporting member. 

Also, if you need parts for any of my designs, please use the BOM link provided on the model page when buying. This gives me a small commission.

Update 19 may 2025 :

• Print profile added! 1 liter box is now available with no logo. Useful if you would like to customize your box, or for when my membership is up and running. Then you can print and sell.

Update 13 may 2025 :

• Print profiles added with an alternative bottom made to fit the bambu lab LAMP KIT 001 for both the 1 liter version and the 70cl version.

Jack Daniel's Folding door box!

Box Nr 3 is officially out! This one has definitely been the most challenging and fun to make. I really hope you like it as much as i enjoyed making it. The feeling and sound of the box opening and closing is something els!! You just have to try it.

The mechanics of the box are the same as the other one's, i only changed the size and shape. The shape is supposed to look like the main body of the Jack Daniel's bottle.

The inside of the box is made so it hugs and holds the bottle firmly inside.

The box itself is made of 45pcs 3D printed parts, 2 steel rods and 26 magnets. 

There are 2 print profiles atm. One is finished painted and one is unpainted. The parts are laid out on 5 beds and separate into group's. I've tried to lay it out so that you use as little filament as possible when printing in multiple colors. The logos and design on the box is very small an detailed, making it tedious to paint. I saved you the time and did it for you. 

Check out my other boxes here :

• Jack Daniels Tennessee Honey
• Wine Box
• Jeagermeister 
• RedBull
• Sode Can wine box
• Jewellery box
• Jameson
• Crown Royal
•  

3D printed parts :

• knobs x 2
• Center pins x 2
• Bottom x 1
• Top x 1
• Back pcs x 13
• Door parts x 26

The steel rods must be 6mm in diameter and at least 29.5cm long for the 1 liter version and 26.5cm for the 70cl version. (Use a hacksaw or angle grinder to cut) 

Steel rods: Buy here (affiliate link)
This is an affiliate link — I may earn a small commission if you buy through it, at no extra cost to you. It helps support my future designs.

Magnets : Buy via Maker supply (affiliate link)

The magnet size is 6x2mm. 

Buy LED here : (affiliate link)

One's you have printed all the parts and acquired the accessories you need, just follow the assembly guide down below.

Each individual part is marked with a number, making it super easy to assemble.

Follow the numbers in the assembly guide below :

ENJOY!

Follow me if you want to see more of my designs in the future!