Eye roll - Sarcastic hueforge

Funny sarcastic hueforge 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
TO UP SCALE DO NOT CHANGE THE Z HEIGHT

Filaments Used:
    PLA Kingroon Black Transmission Distance: 0.1
    PLA Bambu Silk + Blue Transmission Distance: 0.1
    PLA Kingroon white Transmission Distance: 5.4
    PLA Kingroon red Transmission Distance: 5.6
    PLA kingroon yellow Transmission Distance: 5.8
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #12 (1.04mm) swap to Blue
    At layer #14 (1.2mm) swap to white
    At layer #16 (1.36mm) swap to Black
    At layer #17 (1.44mm) swap to red
    At layer #22 (1.84mm) swap to white
    At layer #23 (1.92mm) swap to yellow
    At layer #26 (2.16mm) swap to white for the rest.