Samsung S22 Ultra case (DIAMOND)

Samsung S22 Ultra case (DIAMOND).

See original version for more details:

https://makerworld.com/en/models/831833#profileId-866250

See 3D model for the most up-to-date design representation.

Durability:

For a longer lasting case, consider printing in PETG or ABS. Be sure to switch the print profile filament type to generic PETG or ABS.

You can also remove all modifiers and print at 100% infill. 

Print:

ABS & PETG: I recommend scaling the model up by .5-1% when printing with with PETG or ABS due to shrinkage. Although the case fits at 100%, this reduces tension stress and the possibility of the part snapping during a drop.

ABS & TPU: Print without modification using PLA or TPU.

Patterned Cases: The repetitive stop and start nature to achieve this surface pattern for the initial 10 or so layers adds significant time and complexity to the print process. If you prefer a more simplified print, I recommend printing the original version. Also, I highly recommend the original Bambu Labs filament as I have had mixed results with the initial layer adhesion using other 3rd party filaments. Either way, be sure to monitor the print for at least the initial layer to ensure successful surface adhesion.

*This design started as a simple weekend project, but has taken a surprising number of revisions and reprints to achieve the final model accuracy and specification seen here, so if you like the design, don't forget to rate, review and boost.

Enjoy!