Samsung Galaxy S22 Ultra Case (ORIGINAL)

Samsung S22 Ultra case.

PERFECT FIT.

For HONEYCOMB design see: https://makerworld.com/en/models/1050669#profileId-1037348

For DIAMOND design see: https://makerworld.com/en/models/1050725#profileId-1037406

For CREDIT CARD design see: https://makerworld.com/en/models/1431758-samsung-galaxy-s22-ultra-credit-card-case#profileId-1488871

(refer to 3D model or rendered images for the most up-to-date representation of the model)

Durability:

For a longer lasting case, consider printing in PETG or ABS. Be sure to switch the print profile filament type to generic PETG or ABS.

You can also remove all modifiers and print at 100% infill. 

Print:

ABS & PETG: I recommend scaling the model up by .5-1% when printing with with PETG or ABS due to shrinkage. Although the case fits at 100%, this reduces tension stress and the possibility of the part snapping during a drop.

ABS & TPU: Print without modification using PLA or TPU.

Use my print profile (supports up to 45 degrees recommended).

You do not need supports for the charging holes…etc (but recommended).

You do not need supports for slight overhangs at each end of the cover.

*This design started as a simple weekend project, but has taken a surprising number of revisions and reprints to achieve the final model accuracy and specification seen here, so if you like the design, don't forget to rate, review and boost.

Enjoy!