Round chain print in place
Print Profile(1)
Description
Make sure you have a clean plate before printing this. If you are having trouble printing it successfully, reduce to 50% print speed on your bambu printer after you start the print.
Get the connector link here https://makerworld.com/en/models/1356229-chain-connector-link#profileId-1399945 to join multiple chains
This is a unique and strong chain that is printed in place with minimal supports. Most chains that are printed in place have a flat part, but this is a true round chain link, printed interlocking. The support raft is not too much extra material and peels right off after printing.
You might use this for a decoration or it's also just fun to play with as a fidget.
PLA or PETG will work, though PETG will be stronger.
There are two plates with different sizes. If there is demand I can add more sizes. Enjoy!
Why limit yourself to one color? Make an infinity cube with up to 16 colors, no AMS required!
Check it out: Rainbow Fidget Cube
Also, check out these TPU infill coasters!
Lastly, If you would like to sell physical prints of my standard license models only, you can join my Patreon here. This license does not allow selling or distributing the digital files, and your membership must remain active while you sell physical prints.
This remix is based on
License
Comment & Rating (51)