48v DIY Battery box 4.3 inch Touch Display Bracket
Print Profile(1)
Description
I was annoyed by the way the 4.3 inch touchscreen of the JK BMS is mounted in the Yixiang battery box (but also in many other DIY boxes).
I searched online for alternative ways to mount the display, but I could not find any that I liked, so I decided to design my own bracket.
After some trial & error, I got a bracket that fits PERFECTLY, just the way it actually should have come from the factory.
It uses the original 4 screw holes, but the M3 screws need to be replaced with longer M3x20mm screws and some washers.
Other than that, it is really plug and play. You might need to enable support for printing (tree)
Display Bracket now tested and approved by Andy from Off-Grid-Garage (starting at 7:25):
Boost Me (for free)
If you like my design, I would very much appreciate your support by giving a boost! Thanks!
(each Boost is worth a few grams of new filament)
If this bracket helps, feel free to give me a boost!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (24)