Octopus in the sea Bookmark
Print Profile(1)
Description
A new Bookmark for all of you guys.
This time it is a cute octopus.
Boost Me (for free)
Boost me if you want to se more of my creations.
Model comes with 4 holes in the cornes and cord hole in the top part. Feel free to remove and or play with them as you see fit.
As usual you can scale on X&Y axis but do not scale on Z to not mess up layers and color changes.
If you do resize please remember to uncheck uniforma scale in the interface to avoid problems.
Print instructions
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 40.08x150.01mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.1mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA JAYO Gray Transmission Distance: 5.6
PLA JAYO White Transmission Distance: 7.2
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Gray
At layer #16 (1.36mm) swap to White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (6)