A1 LED Bar V2
Copyright Claim
A1 LED Bar V2
Boost
93
225
69
Print Profile(3)
0.2mm layer, 2 walls, 15% infill
Designer
1.9 h
1 plate
Bar only 0.2mm layer, 2 walls, 15% infill
Designer
46 min
1 plate
Bracket´s only 0.2mm layer, 2 walls, 15% infill
Designer
1.4 h
1 plate
Boost
93
225
69
0
314
258
Released
Description
V2 is for mounting on the back. Mounting the LED bar on the front can lead to problems with the Z-axis.Assembly is at your own risk.
Update from December 31, 2023:
I revised the design again to create more space between the print head and the clamp.
I tested this in advance. There were no problems for me. But please also test it for freedom of movement.
You can simply exchange the revised brackets for the old ones.
Comment & Rating (69)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
Printed on my A1 using Ziro Silk PLA. printed clean. File wasnt angled, but I used it in the front as pictured. Purchased
https://a.co/d/dZRMaVb
for the light. Comes with remote too!
(Edited)
The designer has replied
0
Reply
Oh I'm sorry. I mixed up the files. I have just re-uploaded the file.
(Edited)1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
let there be light, printed in PETG. Added some superglue at the clip.
0
Reply
Print Profile
Bar only 0.2mm layer, 2 walls, 15% infill
ready to use now . thank you. printed in Asa
0
Reply
parfais sobre et efficace
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
modified slighlt to fit 17mm light bar
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
super
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
recommend to print in abs due to heat from led strip
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Excellent model. Great solution.
Was so used to having a light bar on my old Ender 3 that I needed something similar on my new A1.
0
Reply
sorry , how do i connect the led to the a1 combo ? by usb on the printer or a separate power source?
The designer has replied
0
Reply
As far as I know, the A1 doesn't have a free USB port. I used an external power source.
0
Reply
I was thinking if I can use the extra 4pin bus connection at the back.
0
Reply
done. just tap the extra 4 pin bus port step down 24v to 12v led
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
the tolerance of the attachment is not correct
0
Reply
© 2024 MakerWorld