Search models, users, collections, and posts
HueForge Album Cover - Van Halen 1984
IP Report
Print Profile(1)
0.08mm layer, 1 walls, 100% infill
Designer
5.2 h
1 plate
Open in Bambu Studio
Boost
24
50
10
2
41
19
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA Bambu Labs Black Transmission Distance: 0.1
PLA Bambu Labs Red Transmission Distance: 3.4
PLA Sunlu HS Yellow Transmission Distance: 6.5
PLA Bambu Labs Jade White Transmission Distance: 5.9
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.8mm) swap to Red
At layer #14 (1.28mm) swap to Yellow
At layer #20 (1.76mm) swap to Jade White for the rest.
License
This user content is licensed under a
Creative Commons Attribution
Comment & Rating (10)