Mini 4WD GRASSHOPPER - RC Conversion (VZ-CHASSIS) - Free 3D Print Model

Search models, users, collections, and posts

Ninsei

Hobby & DIY>RC

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.12mm layer, 5 walls, 100% infill

Designer

1.2 h

1 plate

4.7(7)

Open in Bambu Studio

Boost

159

311

224

Released

Bill of Materials

List other parts

Mini 4WD 1/32 GRASSHOPPER Jr. VZ-CHASSIS x 1: 1x Tamiya 18105
Tamiya Mini 4WD 72mm Shaft x 1: 1 x Tamiya 15417 or Tamiya 15297
Hex Socket Head Cap Screw M2 x 10 mm x 2:
Tamiya AO-1025 truss screw M2 x 5 mm x 7: 1 x Tamiya 94802
self tapping screw M1.4 x 4 mm x 3: or only 1 and the 2 servo screws
1.7 g Servo (AFRC-D1302) with JR connection x 1: JR connection is recommended for standard radio system receivers
1S bidirectional brushed ESC x 1: DasMikro 1S 6A with brake or any other
2.4G 2CH radio system transmitter for RC car with receiver x 1: Turbo Racing P32 with RX41 or any other
1S battery 3.7V, max. 180mAh (with Walkera Plug) x 1: or any 1s battery that fits in
1S lipo scharger x 1:
screw drivers x 1:
optional: small zip ties or Velcro fasteners to fix the electronics x 1: if you have to solder the ESC and a battery connection cable
optional: 2 Pin Walkera plug wire (22 AWG) x 1: if you have to solder the ESC and a battery connection cable
optional: servo lead extension (100 mm) x 1: if you have to solder the ESC and a battery connection cable
optional: soldering iron and solder tin x 1: if you have to solder the ESC and a battery connection cable
optional: shrink tube x 1: for the ESC and the receiver

Description

Convert your Tamiya Mini 4WD GRASSHOPPER (VZ-CHASSIS) with these 3d printable parts, some screws and RC electronics to a full proportional 2WD radio controlled car. The printed parts are easy to assemble – just click and screw. Check the Build Guide for instructions!

mini 4wd rc conversion