Search models, users, collections, and posts
MSX EEPROM CARTRIDGE CASE
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
1.7 h
2 plates
Open in Bambu Studio
Boost
5
9
1
1
8
2
Released
Description
Content has been automatically translated.
This is the case design I have created for the MSX EEPROM CARTRIDGE REV 1.5, which I am sharing with everyone. 😎
In the PCB I assembled following the instructions given by MSX Makers, I used the W27C512 EEPROM (64k). I placed the 100nF multilayer capacitor horizontally to avoid hindering closure, and I left the 3mm LED with sufficient height to protrude through the top cover of the cartridge…
The cartridge features recesses for the 12-switch DIP switch, the electrolytic capacitor, the EEPROM, and the LED.
The two cartridge covers are joined by pressure and two M3x10 screws.
And that's all.
LINKS:
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (1)