Temple of the Forbidden Eye Snake Statue Vase - Free 3D Print Model

Search models, users, collections, and posts

The Render Lair

Household>Decor

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

18.6 h

4 plates

4.9(21)

Open in Bambu Studio

Boost

318

744

313

116

Released

Description

If you're a fan of Disneyland, then this snake monument should look familiar. Located at the entrance of the Indiana Jones Adventure: Temple of the Forbidden Eye, are these ancient snake statues that I turned into a 12" vase.

Everything modeled in Zbrush. Pieces are split apart and would need to be glued. There are 2 versions of the bowl piece, one having more decay to it.

indiana jones

indiana jones adventure

Comment & Rating (61)

@Yii699

Boosted

I turned mine into a fountain. I glued a old piece of plastic to the bottom and ran my tube through it. then filed it a bit with some pea gravel to give it weight to keep it from tipping. next glued half a old failed pokeball to the basin piece, drilled a hole and ran the tube through that. put more pea gravel in the basin for looks but my pump is a bit to strong and launched some out. Will replace with a smaller one. 5 stars

GIF

The designer has replied

@TheRenderLair

That is rad!! Awesome idea, thanks for sharing!

@ryanbarclay

this is awesome! did you scale this up from default scale?

@Yii699

Boosted

Replying to @ryanbarclay :

no it's not scaled. I didn't think about scaling it until after I was finished

@undeadriot

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

very cool model. thanks! Any chance for a tea light size?

@Petezilla

Boosted

I love that idea! I just pieced it together in Bambu studio - gonna see how it turns out. My tealight insert is ugly cause I made it for a different model and just wanted to do this quick and dirty... I'll let you know how it turns out.

@Petezilla

Boosted

I ended up redoing the twilight holder cause it was too small. Not bad for me hacking it together in the slicer, but it would probably been a little better if I scaled everything down and printed as pieces. Super nice model though. I just have to get enough of a nice marble filament or something to print out full size

@undeadriot

Boosted

Replying to @Petezilla :

nice! I’m going to try it

@BEOfficial

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

PLEASE make more Disneyland prints. Absolutely blown away by this design, well done. Can’t wait to print this gigantic, or in a future project.

The profile uploader has replied

@TheRenderLair

Thank you so much! Will definitely be making more Disneyland pieces

@BEOfficial

Boosted

Replying to @TheRenderLair :

Please do! HUGE fan of your work, keep it up!

@bootleather1

Print Profile

0.2mm layer, 2 walls, 15% infill

A very well designed model! Love it.

@The_echoscapes

looks fantastic. is that just a black wash over a cream filament for that finish?

@Petezilla

Boosted

Nearly perfect print. Really great design. I actually printed the bowl upside down and it shaved about 2 hours off the print time. I should note, since I flipped it, I also increased the bottom layer thickness to match the top layer thickness.

The designer has replied

@TheRenderLair

Thank you! And thanks for the good tip!

@3DPrintinHobiez

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

cool print! now all that’s left is to decide how much bigger I should print 😝

@Petezilla

Boosted

How big did you print? I was thinking about trying to max out the build plate myself. I bought 2 rolls of filament specifically to print this big

(Edited)

@3DPrintinHobiez

Boosted

Replying to @Petezilla :

I haven’t done the larger scale one but finished adding some color and adding plants on original size

(Edited)

@Bakedby.J

Boosted

looks really good love the colour what filament did you use?

@Yves_Hephaestus

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

pieces should been split differently and the curve of the bowl is at some point to much which causes filament wires dropping of the bowl. Considering the whole print it is still a beautyfull piece! I did print the snakes standing up for better Quality.

The profile uploader has replied

@TheRenderLair

Thanks for sharing and QA!

@Yves_Hephaestus

Boosted

I started learning zbrush for the last two weeks, it made respect your work even more it deserved a second boost 😉

(Edited)

@parasyte40

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

looks great! the bowl right where the tree supports connect need to have the layer height reduced, but it’s not visible when you put the bowl on. print this one from the desktop app and enable supports and reduce layer height to .08 for that rounded bottom curve on the bowl.

The profile uploader has replied

@TheRenderLair

How did I miss this comment? Thanks for the boost and the tip!

@snooziescottie

Print Profile

0.2mm layer, 2 walls, 15% infill

Absolutely amazing print. Had issues getting the fangs in place, had to take a blade and scrape around the tops of the mouth.

The profile uploader has replied

@TheRenderLair

Thanks for the feedback and pictures!

@Killtronic1150

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Love it, printed it at 150% 👍🏻

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

longboi articulated snake

bsjavik

17.7 k

3.2 k

The forbidden fruit

Billy&Katie Hooper

21.7 k

14.1 k

Articulated cobra snake

Chrobakx

16.7 k

4.7 k

Vase

mackie2109

27.9 k

4.6 k