Search models, users, collections, and posts
Ikea Kallax Extra Shelves Jig Guide
IP Report
Print Profile(1)
0.2mm layer, 6 walls, 15% infill
Designer
1.4 h
3 plates
Open in Bambu Studio
Boost
129
551
2
2
115
34
Released
Description
Helps with drilling holes into the Ikea Kallax shelves so that you can rearrange the cubes
Requires a 6mm drill bit
Models:
- 4 Drill hole guides depending on which piece you're drilling into.
- 2 long L brackets to help you center the hole guide.
- Full length and shorter dowels (plugging holes, don't push all the way in).
Instructions:
- Figure out and label which drill hole guide you need for each piece (DOUBLE CHECK that you're using the correct one by overlapping it up with the original peg holes unless you want an extra hole in your Kallax).
- (optional, recommended) Fully assemble Kallax to help with lining everything up.
- Place Kallax in the orientation you want to use it in.
- Use the 2 L brackets to center the drill hole guide (might need to wiggle the Kallax to get it to fit).
- (optional) Clamp down drill hole guide.
- Use 6mm bit to drill out required holes.
- Partially dissemble Kallax.
- Place new shelves in using the shorter dowels (don't push all the way in, hole depth seems to vary alot (+-3mm).
- Reassemble Kallax
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)