AMS Spool Removal Tool 52mm

I have been using a 3D printer only since the beginning of January this year, and like almost every A1 Combo user, I have produced the AMS lite Enclosure model. (https://makerworld.com/en/models/486153?from=search#profileId-584752)

After the AMS lite enclosure unit, I realized the difficulty of removing the spool and immediately discovered the Spool Removel tools, but I realized that they do not fit the cardboard spools with an inner diameter of 52 mm, such as Creality, Esun, and some local spool brands etc.. I decided to draw the 52mm version and upload it here. 

First I made a test print with PETG because the wall thickness was thin, but the one I printed with PLA was much easier to use. The surface is more slippery and the spool comes out easier. The material I used in the photos is ESUN PLA+ Cold White . I hope you like it too. 

It works especially well on cardboard spools. (I also recommend printing a spacer for the cardboard spool. They also make it very easy to remove the spool. Such as https://makerworld.com/en/models/665427#profileId-592899 ) By the way, I use the PT-P750W desktop label printer to create the labels on my 3d prints.