Power-Clip (Skadis compatible)

• modular, strong, ergonomic, powerful, durable
• Ikea Skadis adapters
• does not slip out of the fingers
• different shapes (clip arms) for different purposes 
• simple, modular 3 part design (2 arms, 1 spring)
• replaceable spring (separately printable) when force decreases or damaged
• can be hung on a cord

!!! Consider printing at least the spring from a rigid material like e.g. PETG. This significantly increases the durability. Clip arms work well in PLA !!!

I recommend printing the arms in PLA and the clip in PETG, or just use PETG for all parts.

There are several print plates you can choose from, depending on your needs:

1. Clip with long and sharp teeth (has the strongest grip, e.g. for plastic bags, etc.)
2. Clip with flat teeth (does not damage sensitive objects, e.g. for paper, photos, etc.)
3. Clip with long and sharp teeth with a Ikea Skadis adapter
4. Clip with flat teeth with a Ikea Skadis adapter
5. Replacement springs

Assembly

1. Insert the spring halfway into one arm 

   

   

2. Slide the second arm onto the spring. The two arms now cross over each other when viewed from above.

   

3. Push the arms apart and slide each arm further over the spring.

   

4. Place the clip on a flat surface and press from above so that the arms lock into place.