Snap Together Tape Spool
Print Profile(5)
Description
Another tape measure spool. This snap-together spinning tape measure spool has a spinning handle as well as the main spool section.
I recommend PETG or PETG-HF. It may work but, I do not recommend PLA.
If you want to print in PLA, and/or see the latest remix please see:
Version 6 has been uploaded with a bigger crank handle and changed print orientation more suitable PLA (but recommend PETG) please find it here:
https://makerworld.com/en/models/1034323#profileId-1017787
Version 7 has been uploaded without a crank handle, suitable for PLA or PETG.
https://makerworld.com/en/models/1299130-snap-together-tape-spool-version-7#profileId-1331095
Previous UPDATE:
Now three different Print Profile versions uploaded for 17 mm or 20 mm wide tapes (20mm wide versions are available in Canada at Dollarama).
Version 5
- Covered spool section;
- 2 options, with maximums of either:
- 17mm; or
- 22 mm wide tape measures
- PETG recommended
Version 4
- for the larger 20 mm wide tapes
- slightly thicker walls than version 3
- PETG recommended
Version 3
- the original build that was published to MakerWorld,
- 19mm high, or 22 mm high designed for 17 mm or 20 mm wide tapes respectively.
- These heights do not include the spinning handle.
- Will probably fail in PLA, recommend PETG or stronger.
All versions Snaps together (no glue), they have a spinning handle, no supports required to print, If you only have PLA, please see the Version 6.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (330)