Eragon cover
Print Profile(1)
Description
Cover art for Eragon, one of my favorite books of all time!
Two profiles, one without magnets and one with, slots sized for 3/4" Long x 3/8" Wide x 1/32" Thick Rectangular Plate shaped magnets
“Atra esterni ono thelduin. Atra du evarínya ono varda. Un atra mor'ranr lifa unin hjarta onr.”
Project: Eragon cover 2.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 100x121.28mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Matte Dark Blue Transmission Distance: 1
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Matte Marine Blue Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
No magnets:
Swap Instructions:
Start with Dark Blue
At layer #7 (0.64mm) swap to Blue
At layer #13 (1.12mm) swap to Marine Blue
At layer #19 (1.6mm) swap to Jade White for the rest.
Magnets:
Swap Instructions:
Start with Dark Blue
At layer #19 (1.54mm) swap to Blue
At layer #24 (1.94mm) swap to Marine Blue
At layer #31 (2.50mm) swap to Jade White for the rest.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (4)