Bambu Scraper Multitool

I like having all my tools in one place! It's satisfying for me to see efficient use of space. I was also getting tired of dropping my allen wrenches on the floor and forgetting where they were. So I decided to utilize some of the empty space within the original Bambu scraper to hold the wrenches. From there it became a contest to see how many tools I could fit in.

What tools does it hold?

The scraper is made from the same M3 screws and blade that came with the X1-C. The allen wrenches on the side are the same ones that came with my X1-C. I've heard that the larger wrench can actually vary in length, but it won't be an issue with this model.

The flat wrench and small screwdriver you see in the pictures are actually part of the tools that came with my first 3D printer, an Ender 3. If you want the tools but don't want to buy an Ender 3 (understandable) you should be able to buy them from here. Otherwise, there are versions of the model without spaces for these tools.

What kind of magnets do I need?

Depending on which version you print, you will either need 5 or 8 6x3mm magnets. Here are the ones I used. Check the last picture for the locations of each magnet. Make sure you push in the external magnets from the side, as there is a small lip on the top to prevent them from escaping.

All the magnets can be easily retrieved without damaging the main part, either by using pliers for the external ones or by pushing the small allen wrench through the holes on the bottom for the internal ones. And if you want to hide those small holes, they're just the right size to stick a piece of filament into.

Miscellaneous

There are versions of the model that don't use the AMS.

The bottom part of the scraper (where the screws screw into) is much flatter than the original model, giving it a slimmer profile.

WARNING: I had to disable the Prime Tower because the “AMS Logo” plate was causing a slicer error on my system. Please try to enable it yourself before printing if you're worried about the color quality. I don't know why it's breaking, it works fine for the “AMS Logo + Screwdriver & Wrench” version…

I hope you enjoy!