BOW LIMB TIP PROTECTOR
Print Profile(0)
Description
Here you have a limb protector for uukha bow limbs… although probably will work for many other brands and types of limbs.
Printed in TPU weights around 1.2 grams, more or less the same as a commercial version, but the advantage of you being able to print twenty for the price of one.
Ensure in your slicer that the perimeter is thick enough to provide two loops per layer, if the perimeter is too thick, it will only make one loop per layer thus making the model very thin (I modelled it in fusion 360 with a thickness of 0.8 mm, so it will provide 2 loops for a 0.4mm thick perimeter)
Don´t print it too fast… too, me around 25 minutes per unit on a H2d with generic TPU settings.
Enjoy and modifty at your own risk! :-)
Note: no supports needed when printed vertically.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)