M5Stack Cardputer ADV Case Hacker

I had the problem of carrying my Cardputer ADV with the Lora or Pingequa module for my hacks without it getting damaged and with the rear module dangerously protruding.

So I created this case, compatible with the original M5 Stack Lora module and with the case of the Pingequa module NRF24 2.4G + CC1101 433Mhz that I designed. 

The case allows all rear buttons, the SD card, and the IR module to be used without issues. It's also equipped with 6x3mm cylindrical magnets (diameter x height) to keep the lid closed and 20x10x1mm magnets to hold the Cardputer in place. To insert the magnets, you need to use the "pause" function of the slicer.

It is recommended to print it with a 0.2mm nozzle in PETG.

The case does not require the use of additional hardware.

Shopping list:

-4 Cylindrical magnets 6x3mm (Optional)

-2 Magnets 20x10x1mm (Optional)