Mini Pliers - Free 3D Print Model

Search models, users, collections, and posts

Pan

Tools>Hand Tools

IP Report

Print Profile(2)

All

A1 mini

P1P

X1 Carbon

H2D Pro

H2D

X1E

H2S

P1S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

35 min

1 plate

4.8(32)

0.05 X-Y compensation for better fit clearance

Designer

36 min

1 plate

5.0(19)

Open in Bambu Studio

Boost

242

709

478

382

Released

Description

Content has been automatically translated.

Show original

Chinese:

This is a mini clamp designed for one-handed operation. Since I often work on painting and detailing small components and sometimes have trouble holding them steady, this is essential! Using this mini clamp allows me to perform tasks with greater precision.

Note: As performance may vary between different 3D printers, if you find it too tight or too loose after printing, it is recommended to adjust the X-Y Contour Size Compensation under Quality/Precision settings. A value between 0.08 and 0.13 or -0.08 to -0.13 is suggested. Try to stay within this range. The value currently set in the print profile is what worked well for my printer.

Recommended: Print with PLA.

English:

This is a mini clamp designed for one-handed operation. Since I often work on painting and detailing small components and sometimes have trouble holding them steady, this mini clamp is essential for me! It allows for much greater precision during detailed work.

Note: As performance may vary between different printers, if you find the clamp is too tight or too loose after printing, it is recommended to adjust the X-Y Contour Size Compensation value under the Quality/Precision settings. A value between 0.08 and 0.13or -0.08 to -0.13 is suggested. Try to stay within this range for optimal results. The value currently set in the print profile is what worked well for my printer.

Recommended: PLA.

pliers

mini pliers

Comment & Rating (61)

@tpatt97

Print Profile

0.2mm layer, 2 walls, 15% infill

I really like these pliers! Only thing that might make them better would be to make the thumb arm of the pliers higher to make it easier to operate.

@tundra3866cda

Print Profile

0.2mm layer, 2 walls, 15% infill

Zero issues with print profile, printed well.

@nozzles

Boosted

Print Profile

0.05 X-Y compensation for better fit clearance

perfect

@Don_Pablete

Print Profile

0.2mm layer, 2 walls, 15% infill

Perfect movement. Good grip and they seem very sturdy

Show original

@REB2025

These pliers are a great addition to my craft / wood shop! I am just a beginner at 3D printing, and I am using an Elegoo CC. Initially, I had difficulties using the 3MF file in the slicer. So, I converted the 3MF file to a single STL file, and the Elegoo CC printed it perfectly with no adjustments needed. These will definitely get a lot of use. I would give this a 5 start rating, but could not figure out how to add a rating to my comments. Thank you for sharing this model.

@Porton10

Print Profile

0.2mm layer, 2 walls, 15% infill

works absolutely fine

@DaHoppa

I love this design, but mine broke at the middle almost right away!

The designer has replied

@Cherrywaya

You can try adjusting the x-y compensation to 0.08 and -0.08 and after printing is complete wait for it to cool before removing it from the build plate this should solve the problem hope this helps you

Show original

@REB2025

It looks like a nice tool and it prints well, but I must be missing something in the assembly. I downloaded the three STL files and printed them, but I cannot figure out how to connect them. It seems like the connecting piece in the part 1 STL file should be two pieces. I am a beginner at this, so it most likely my misunderstanding of the print.

The designer has replied