Dragon Hueforge
Print Profile(1)
Description
There is a pause enabled to change fillaments in AMS. Have fun and post pics of your makes!
Project: dragon stamp.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.56mm
The Max Depth is 2.6mm and the Actual Depth is 2.7mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA+ Sunlu Light Gold Transmission Distance: 3
PLA PolyLite White Transmission Distance: 5
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #12 (1.04mm) swap to Blue Gray
At layer #13 (1.12mm) swap to Light Gold
At layer #22 (1.84mm) swap to White for the rest.
Boost Me (for free)
Remember to boost the prints you like!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)