Detail of model excellent. Holes in treads allow supports to thread through, making extremely difficult to remove without damaging treads. Tried tree with chassis and snug with turret

Looks like perhaps an Fw 190 A-5. I printed it at 0.22mm High Quakity with a 0.4mm standard X1C nozzle. I printed at 70% size to match a Bf 109 die cast model. The print quality itself is great; it was a wonderful idea to print the fuselage and wings vertically. I tried a golden yellow band on the tail, which worked great, and on the wingtips, which were too thin. The slot fit for the wing is too tight (sanded and glued), and there is no slot for the horizontal stabilizers (glued).

used the no tower, no brim profile in Bambu Lab translucent PETG. perfect snug fit and printed beautifully.