Print Profile(3)
Description
This is the Brix case from the Qwatch collection.
Each Qwatch case was designed to give the same smartwatch hardware a different look and feel, from understated to deliberately bold.
The supplied 3MF files are ready to print. Follow the print instructions for the recommended settings, orientation and assembly process.
. 
Print the case, the back plate and 2 shim pieces. These are used to align the board and centre the watch face within the case so take care when lining these up. You will need one or two placed as shown above depending on the exact alignment of the screen and the tolerances of your printer. The back plate simply twists into place to secure it.
The remaining Qwatch campaign files, including the strap files, watch hardware guidance and other case designs, are provided separately.
This upload contains the printable case components. The remaining Qwatch campaign files, including the strap files, watch hardware guidance and other case designs, are provided separately.
See below for the link to the main project.
__________________________________________________________________________________________________
Check out my latest design: Qwatch the fully customisable smartwatch. Only on Makerworld.
https://makerworld.com/en/crowdfunding/273-qwatch-the-customisable-smartwatch
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)