Beer O'clock

After work this is the only clock you'll need.

Combining mikeaj's wristband with jwags55's can lid, you get a swag that get's a laugh out of your friend or stranger at a bar. Or you could try to use this to get out of that last meeting in friday.

Notice: This does not tell real time!

Notice: Wife/husband can still be upset after night out!

Notice: Use this watch responsibly! Know your limits!

Using silk filament you'll get metallic shine. Some silk filaments have troubles on layer adhesion and therefor wristband might start breaking under pressure. I used Eryone's silk copper PLA and Devil Design's PLA grey. Stretch capacity is really nice because of the spiral vase mode.

Cut the wristband from any location with side cutters (your printer came with one) and insert the other end to other side of the watch body. Then measure what length is right for you and make another cut. Then push the other end to watch body's other side. You can glue the wristband to the body, but at least in my case glue was not needed.

You could also use velcro strap instead of the printed wristband.

Beers are sold in different colored cans, these are the colors of my favourite beer, please show me your prints!