A slightly modified version of the Tamping Station. The Umikot LongTab can be used here and the portafilter holders are rotated 45 degrees for using it with a Portafilter of the Gaggia Classic

This is a small gadget when it comes to loosening the hose connections (¼ "screw connections) of a water cooling system. Unfortunately, I have often had the problem that the screw connection rotates when I loosen the union for the hose and is very difficult to grip. With this gadget you can hold the screw connection and easily loosen the cap.

An adapter to move the glass window of an O11 dynamic slightly outwards. I converted my PC to a custom water cooling system and unfortunately discovered that the housing for the graphics card water cooler is a bit too narrow. The solution to this problem is this adapter. It is simply screwed onto the existing pins with an M4x10 screw and an M4 nut and clamps tightly, thereby gaining around 9mm of space for the graphics card.

Das ist eine Luftführung für die Rückseite des O11 dynamic, wenn auf dem Radiator noch zusätzliche Lüfter verbaut sind. Jetzt als verstärkte Version damit sich nichts mehr verbiegt. This is an air duct for the back of the O11 dynamic if additional fans are installed on the radiator. Now as a reinforced version so that nothing bends anymore.

Das ist eine Luftführung für die Rückseite des O11 dynamic, wenn auf dem Radiator noch zusätzliche Lüfter verbaut sind. This is an air duct for the back of the O11 dynamic if additional fans are installed on the radiator.

Das ist eine Halterung für eine Lightbar zum Einhängen in eine mit Daumenschrauben verschraubte VESA100 Halterung. Es wird nur eine M3x10 Schraube benötigt. This is a mount for a light bar to be hung in a VESA100 mount screwed with thumb screws. Only one M3x10 screw is required.